A whirlpool bathtub is a great addition to your home. It provides numerous benefits and it can be something to look forward to at the end of a long, tiring day. To maximize the experience, keep your tub at its best by following these useful cleaning tips:
- Following the manufacturer’s recommendations in avoiding oil-based soaps, bubble bath soaps, and bath and mineral salts is an important part of preventative maintenance. Avoiding these products will eliminate potential pump issues and ensure that an excessive amount of residue is not sticking to the interior walls of the piping. Depending on its use, a whirlpool tub’s circulation system should be flushed of residue accumulation on a monthly or bi-monthly basis or, if possible, after each use. Source: Buildipedia
- Before cleaning your jets for the first time, check the manufacturer’s manual. Some manufacturers recommend closing the air controls, while others recommend leaving them open during cleaning, and certain manufacturers recommend specific cleansers for their tubs. Source: ApartmentTherapy
- Once a month — or more often for tubs that get a lot of use — you should also remove any accumulation of bath residue (from body oils, dirt, soaps, shampoos, lotions) from the whirlpool system. First, fill the bath with hot water (up to 140° F) and add 4 tablespoons to 1/4 cup of a low-foaming disinfectant (such as powdered dishwasher detergent). Some manufacturers suggest adding 1/2 cup of household bleach. Turn off the air induction and run the water jets for 10 to 15 minutes. Then drain the bath and refill with cold water only. Run the whirlpool for 10 to 15 minutes, then drain again. There are also commercial cleaning products made specifically to do this job. Source: GoodHousekeeping
- Residue accumulation or scale deposits may persist on the interior walls of the piping, even after cleaning. You should consider having the whirlpool tub cleaned professionally on a yearly basis. A professional cleaner should flush, descale, and disinfect a whirlpool circulation system. Source: Knoji
Planning on getting a new whirlpool tub? It would be our pleasure to assist you with finding the perfect one for your home. Contact us!
Contact:
Eago Parts
Phone: Toll Free 1-888-556-1912
Calgary, Alberta
Email: info@eagoparts.com
