Knowing how to get rid of mold in showers, and keep it from returning, can save you both time and money. Here are 3 simple ways to remove bathroom mold. Read on!
To properly care for your bathroom and remove the mold from tile grout, you will need a good scrub brush and baking soda. To effectively scrub the mold away, treat the grout between tiles and the caulking with a paste made of water and baking soda. Leave on for as long as you need to—for example, very dirty grout can use an hour or two. Spray the tiles with water and use a scrub brush to clean the grout with a brisk back and forth motion. Rinse well and buff dry. Once you have scrubbed the grout, you can prolong your mold-removing efforts so that you do not have to use as much elbow grease next time! If your bathroom is not properly maintained between cleanings, it does not take long for mold to come back. In fact, think of mold prevention like oral care—we have to maintain our teeth to keep plaque away. Source: NaturallySavvy
Put mild white vinegar in a spray bottle without diluting it. Vinegar has a mild acidity, making anywhere you spray it very inhospitable for mold. Do not dilute the vinegar when placing it into the spray bottle; you want to use it at full-strength, not watered-down.
Spray the vinegar onto moldy surfaces and wait for an hour. If possible, let the bathroom air out during this time.
After an hour, wipe the area clean with hot water and dry the surface with a towel. Damp surfaces encourage mold growth, so be sure to wipe the area clean fully. After you have wiped the vinegar away, it should not smell anymore.
Use vinegar to prevent outbreaks of mold before they happen. Vinegar is reported to kill 82% of mold species, making it an exceptionally effective solution for preventing mold from inhabiting your bathroom like it owns the place. Plus, vinegar does not have any toxic fumes (like bleach) and is all-natural.
- Simply spray a bit of vinegar onto a mold-prone surface and leave it. If you do this regularly, mold will have a tough time growing, and you will not have to remove it in the first place. Source: wikiHow
Hot Water and Baking Soda
You’ll need one teaspoon of washing up liquid, one cup of baking soda, and a few drops of something fragrant (we recommend lavender or citrus oil). Then add water and mix until the solution becomes a viscous paste and you’re done – a natural black mould remover. Source: Cleanipedia